截止阀标准汇总
时间：2008/7/31 来源：浙江三精阀门有限公司
截止阀标准汇总
|
标准编号 |
标准中文名称 |
标准英文名称 |
|
DL/T531-1994(2005复审) |
电站高温高压截止阀、闸阀技术条件 |
|
|
GB/T11689-1989 |
船用法兰铸钢截止阀(四进位) |
Marine cast steel flanged stop valves |
|
GB/T12235-1989 |
通用阀门法兰连接钢制截止阀和升降式止回阀 |
General purpose industrial valves—Flanged steel globe valves and lift check valves |
|
GB/T12233-1989 |
通用阀门铁制截止阀与升降式止回阀 |
General purpose industrial valves—Casting iron globe valves and lift check valves |
|
GB/T1951-1984 |
船用低压外螺纹青铜截止阀 |
Marine low pressure bronze male threaded stop valves |
|
GB/T2499-1993 |
船用法兰铸铁双排截止阀箱 |
Marine cast iron flange dual-row stop valves-case |
|
GB/T590-1993 |
船用法兰铸铁截止阀 |
Marine cast iron flanged stop valves |
|
GB/T594-1983 |
船用外螺纹锻钢截止阀 |
Marine forged steel male thread stop valves |
|
GB/T584-1999 |
船用法兰铸钢截止阀 |
Marine cast steel flanged stop valves |
|
GB/T595-1983 |
船用外螺纹青铜截止阀 |
Marine bronze male thread stop valves |
|
GB/T587-1993 |
船用法兰青铜截止阀 |
Marine bronze flanged stop valves |
|
JB/T7245-1994 |
制冷装置用截止阀 |
|
|
JB/T7747-1995 |
针形截止阀 |
|
|
JB/T9081-1999 |
空气分离设备用低温截止阀和节流阀技术条件 |
|
|
JB/T53165-1999 |
高压平衡截止阀 产品质量分等 |
|
|
JB/T53174-1999 |
截止阀 产品质量分等 |
|
|
JB/T53155-1999 |
空气分离设备用低温截止阀和节流阀 产品质量分等 |
|
|
JB/T8859-2004 |
截止阀 静压寿命试验规程 |
|
|
HG/T3215-1986 |
聚三氟氯乙烯塑料衬里截止阀 |
|
|
NF E29-350-2003 |
工业用阀.钢制球阀、球状截止阀和止回阀 |
(Industrial valves - Steel globe and globe stop and check valves.) |
|
NF P43-001-2000 |
建筑物用阀门.建筑物中供应引用水用铜合金截止阀.试验和要求 |
(Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements.) |
|
NF D36-380-2001 |
燃气燃烧器和燃气用具用自动截止阀的阀门检验系统 |
(Valve proving systems for automatic shut-off valves for gas burners and gas appliances.) |
|
NF A84-621-2002 |
气焊设备.焊接、切割和相关工艺用带截止阀的速动连接 |
(Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes.) |
|
NF M88-771-1975 |
液化烃容器装置.手动截止阀.制造.功能.试验 |
(LIQUEFIED HYDROCARBON INSTALLATIONS IN CONTAINERS. MANUALLY CONTROLLED STOP VALVE. CONSTRUCTION. OPERATION. TESTS.) |
|
NF P43-002-1981 |
建筑物水管阀门.水表截止阀.一般技术规范 |
(VALVES AND TAPS FOR WATER SUPPLY IN BUILDINGS. STOP VALVES FOR METER. GENERAL TECHNICAL SPECIFICATIONS.) |
|
BS EN 13709-2003 |
工业用阀.钢制球阀、球状截止阀和止回阀 |
(Industrial valves - Steel globe and globe stop and check valves) |
|
BS 1552-1995 |
一类、二类和三类燃气用手动截止阀规范 |
(Specification for open bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200 mbar) |
|
BS 7461-1991 |
带有流量调节器、闭路开关指示、闭合位置指示器开关或气流量控制的电动自动气体截止阀规范 |
(Specification for electrically operated automatic gas shut-off valves fitted with throughput adjusters, proof of closure switches, closed position indicator switches or gas flow control) |
|
BS 1010-2-1973 |
给排水设施用排放旋塞和截止(旋压式)阀规范.第2部分:排放旋塞和地面上用截止阀 |
(Specification for draw-off taps and stopvalves for water services (screw-down pattern) - Draw-off taps and above-ground stopvalves) |
|
BS 1873-1975 |
石油、石油化学及有关工业用钢球形阀、球形截止阀与单向阀(有法兰及对接焊端)规范 |
(Specification for steel globe and globe stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries) |
|
BS 3457-1973 |
水龙头与截止阀座垫圈材料规范 |
(Specification for materials for water tap and stopvalve seat washers) |
|
DIN 4817-1-1981 |
液态气的截止阀.概念.安全技术要求.检验.标志 |
(Shut off valves for liquefied gases; definitions, requirement, testing, marking) |
|
DIN 86251-1998 |
造船用铸铁制带法兰的DN15至500的截止阀 |
(Shutt off valves for shipboard use, of cast iron, with flanges, DN 15 to 500) |
|
DIN 86260-1998 |
造船用炮铜制带法兰DN15至500的截止阀 |
(Shutt off valves for shipboard use, of gun metall, with flanges, DN 15 to 500) |
|
DIN 85003-4-1997 |
造船用管件的交货技术条件.第4部分:截止阀 |
(Technical specifications for valves for shipboard use - Part 4: Stop valves) |
|
DIN 85003-6-1997 |
造船用管件的交货技术条件.第6部分:手动截止阀 |
(Technical specifications for valves for shipboard use -Part 6: Hand operated gate valves) |
|
DIN 3399-1986 |
低压截止阀.安全技术要求和检验 |
(Gas low-pressure cut-off valves; safety requirements, testing) |
|
DIN 3160-1974 |
公称压力25的冷却剂循环直通截止阀 |
(Through-valves for refrigerant circuits, nominal pressure 25 bar) |
|
DIN 3161-1974 |
公称压力25的冷却剂循环角形截止阀 |
(Elbow valves for refrigerant circuits; nominal pressure 25 bar) |
|
DIN 4056-1992 |
水管.街道地下截止阀门的路盖.DVGW技术规范 |
(Water pipelines; valve boxes for stop valves; DVGW code of practice) |
|
DIN EN 1643-2001 |
燃气燃烧器和燃气用具用自动截止阀的阀门检验系统 |
(Valve proving systems for automatic shut-off valves for gas burners and gas appliances; German version EN 1643:2000) |
|
DIN 86500-1968 |
船用螺纹连接的截止阀和闸阀等概述 |
(Valves and Gate Valves with Screwed Connections; Survey of Types for Shipbuilding) |
|
DIN 86254-2000 |
船只及造船技术.超轻型截止阀DN32-DN125(PN10) |
(Ships and marine technology - Shut off valves extra light duty DN 32 to DN 125, PN 10) |
|
DIN EN 13709-2003 |
工业用阀.钢制球阀、球状截止阀和止回阀 |
(Industrial valves - Steel globe and globe stop and check valves; German version EN 13709:2002) |
|
DIN EN 1213-1999 |
建筑阀门.建筑物中饮用水供应用铜合金截止阀.试验和要求 |
(Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements; German version EN 1213:1999) |
|
DIN 86266-2002 |
船舶和航海技术.用手夹紧和法兰连接的超轻型法兰的截止阀 |
(Ships and marine technology - Butterfly valves for flanges extra light duty wafer type and flanged type - DN 50 to DN 125, PN 10) |
|
GB/T1856-1993 |
船用法兰铸铁单排排出截止阀箱 |
Marine flanged cast iron single arrangement exhaust stop box valve |
|
GB/T1854-1993 |
船用法兰铸铁单排吸入截止阀箱 |
Marine flanged cast iron single arrangement suction stop box valve |
|
JIS B8605-2002 |
致冷装置的截止阀 |
(Stop valves for refrigerants) |
|
JIS F7379-1996 |
造船.卡套式30K黄铜截止阀 |
(Shipbuilding -- Brass 30K stop valves with bite joint(s)) |
|
JIS E4103-1988 |
铁路车辆用截止阀 |
(Cut-out cocks for railway rolling stock) |
|
JIS E4114-1989 |
铁路车辆用青铜截止阀 |
(Bronze stop valves for railway rolling stock) |
|
QB/T3880-1999 |
卫生洁具、暖气直角式截止阀技术条件 |
Technical requirements for sanitariness ware and heating angle valve |
|
QB/T3881-1999 |
卫生洁具、暖气直角式截止阀型式和尺寸 |
Shapes and dimensions of sanitariness ware and heating angle valve |
|
JB/T10530-2005 |
氧气用截止阀 |
|